SFS Suomen Standardit

 

This document specifies requirements and tests methods for deposit systems, and classifies the systems according to their burglary resistance and their resistance to the theft of deposits. This document comprises two types of deposit system: — Night safes which provide depositing services for the customers of financial institutions without giving access to the content of the night safe. — Deposit safes which enable the personnel of a company to place money or valuables in safe custody without giving access to the content of the deposit safe. The installation condition for deposit safe according to this document is that the depositing functions are installed inside the premises of the company and are only disposable for the personnel of the company. NOTE Parts of a deposit system are a receiving unit, an input unit and in some cases, a chute. This document includes design requirements for deposit systems controlled by programmable controllers and for the software for these. Controller hardware testing is restricted to mechanical or electromechanical attacks of electric motors, sensors, coils and similar devices; but software testing as attempts to influence controller software or controller hardware is not part of this document. Deposit systems can have devices for functions such as user identification and/or counting and registration of money. Tests of and requirements for classification of such functions are not included. This document does not cover protection of persons using the deposit system or the prevention of fraud committed by operators of the deposit system.

 

This document specifies the selection criteria and minimum requirements for selecting coatings for pressurized service within process vessels. This is given for the following: This document refers to types of coatings that are generally available, with properties that are known and documented. It also allows other materials to be evaluated and qualified for use. This document is to be used for process vessels coated at the new construction phase. It is intended to be used only where the coating is applied directly to the substrate. This document does not cover requirements related to metallic coatings nor weld overlay materials.

 

This document establishes provisions for the labelling of the composition of the components of the plumage for use as fillings and of the fowl species from which such components are derived (waterfowl or landfowl). It is applicable to finished feather and down materials used as fillings of manufactured articles at each stage in their commercial distribution. This document is not applicable for fillings totally containing more than 2 % of foreign matter (see 3.5).

 

This document specifies the service excellence terminology, principles and model so that public service organizations that deliver services could provide outstanding experience to their key stakeholders such as the society (the citizens) they serve as well as other partner organizations they interact with for the purpose of delivering the excellent service.

 

This document is applicable to gas-fired appliances producing domestic hot water. It applies to both instantaneous and storage appliances; water-heaters and combination boilers that have: - heat input not exceeding 70 kW; and - hot water storage capacity (if any) not exceeding 500 l. In the case of combination boilers, with or without storage tank, domestic hot water production is integrated or coupled, the whole being marketed as a single unit. This document sets out in qualitative and quantitative terms the performance in delivery of domestic hot water for a selected variety of uses. It also gives a system for presenting the information to the user.

 

1.1 This document provides the vocabulary, fundamental concepts and principles of innovation management and its systematic implementation. It is applicable to: a) organizations implementing an innovation management system or performing innovation management assessments; b) organizations that need to improve their ability to effectively manage innovation activities; c) users, customers and other relevant interested parties (e.g. suppliers, partners, funding organizations, investors, universities and public authorities) seeking confidence in the innovation capabilities of an organization; d) organizations and interested parties seeking to improve communication through a common understanding of the vocabulary used in innovation management; e) providers of training in, assessment of, or consultancy for, innovation management and innovation management systems; f) developers of innovation management and related standards. 1.2 This document is intended to be applicable to: a) all types of organizations, regardless of type, sector, maturity-level or size; b) all types of innovations, e.g. product, service, process, model and method, ranging from incremental to radical; c) all types of approaches, e.g. internal and open innovation, user-, market-, technology- and design-driven innovation activities. This document specifies the terms and definitions applicable to all innovation management and innovation management system standards developed by ISO/TC 279.

 

 

This International Standard specifies the requirements for the bar code symbology known as EAN/UPC. It specifies EAN/UPC symbology characteristics, data character encodation, dimensions, tolerances, decoding algorithms and parameters to be defined by applications. It specifies the Symbology Identifier prefix strings for EAN/UPC symbols. Data content and the rules governing the use of this symbology are outside the scope of this International Standard; they are defined in the GS1 General Specifications (see bibliography).

 

This document specifies a method of determining the attenuation variation of an optical cable during mechanical bending under load at the maximum and minimum operating temperatures.

 

This document specifies a transfer structure, syntax, and coding of messages and data formats when using high-capacity ADC media.

 

This standard describes methods for testing the environmental characteristics of RFID-enabled sporting goods. This document suggest methods for identifying the main use environments and related testing of environmental characteristics of sporting goods for indoor and outdoor sports with RFID and optionally additional advanced electronic devices like sensors. The addressed environmental characteristics cover the viewpoint of manufacturers including distribution and inventory management, as well as furthermore the aspects of consumer use of the actual RFID-enabled sports items. This standard defines methods to measure and evaluate the performance change of tags after environmental characteristic test.

 

 

This part of ISO/IEC/IEEE 29119 defines an efficient and consistent solution for keyword-driven testing by:

 

This document is applicable to pure cultures of STEC. The present standard describes the characterization of STEC strains, isolated from any source. In particular, the characterization of STEC strains described here regards: The full characterization of the isolated STEC strains is achieved by performing all the modules described here. The characterization scheme is not sequential, and the different modules can be implemented separately based on specific needs (e.g. Regulatory needs, Competent Authority’s requests, clients’ request). Alternative methods may be used, including Whole Genome Sequencing (WGS), provided these are validated according to the most relevant part of reference standard series ISO 16140.

 

This document is applicable to pure cultures of STEC. The present standard describes the characterization of STEC strains, isolated from any source. In particular, the characterization of STEC strains described here regard: - subtyping of the Stx-coding genes; - determination of the presence of eae gene; - determination of the presence of aggR gene; - identification of the presence of genes associated to the following serogroups: O157, O26, O111, O103, O145, O121 and O45. The full characterization of the isolated STEC strains is achieved by performing all the modules described here. The characterization scheme is not sequential, and the different modules can be implemented separately based on specific needs (e.g. Regulatory needs, Competent Authority’s requests, clients’ request). Alternative methods may be used, including Whole Genome Sequencing (WGS), provided these are verified according to the reference standard ISO 16140-2.

 

This document specifies the required characteristics of a semi-rigid light weight coaxial cable, 50 O, type KW for use in aircraft electrical systems at operating temperature between -55 °C and 180 °C and specially for high frequency up to 6 GHz. Nevertheless, if needed, -65 °C is also acceptable as shown by rapid change of temperature test.

 

This document defines terms used in the field of project, programme and portfolio management. It can be used by any type of organization, including public or private, and any size or sector, as well as any type of project, programme or portfolio in terms of complexity, size or duration.

 

 

 

 

Standardi sisältää ohjeet asiakirjan asettelusta, tietoalueista ja metatiedoista. Standardin periaatteita sovelletaan sekä paperimuodossa (pääasiassa A4-koossa) että sähköisessä muodossa oleviin, tekstinkäsittelyohjelmalla tai vastaavalla ohjelmalla laadittuihin asiakirjoihin. Tällaisia asiakirjoja ovat esimerkiksi organisaatioiden tai yksityishenkilöiden laatimat kirjeet, sopimukset, tilaukset, tarjouspyynnöt, tarjoukset, lausunnot, muistiot ja raportit. Standardia noudattamalla helpotetaan ja nopeutetaan asiakirjan laatimista, lukemista ja käsittelyä. Standardin mukaiset rakenteiset asiakirjat helpottavat asiakirjojen automatisointia ja tiedonhallintaa. Standardissa on myös otettu huomioon saavutettavuusvaatimukset.