Ehdotuksen tiedot

Tunnus:prEN 4179
Julkaisija:CEN
Komitea:ASD-STAN
Komitean nimi:Aerospace
Lausuntokierros alkanut:2021-03-21
Lausuntopyynnön määräaika:2021-05-20
Vastuuhenkilö:sirpa.sipola(at)sfs.fi
Ehdotuksen soveltamisala:1.1 PurposeThis document establishes the minimum requirements for the qualification and certification of personnel performing nondestructive testing (NDT), nondestructive inspection (NDI), or nondestructive evaluation (NDE) in the aerospace manufacturing, service, maintenance and overhaul industries. For the purposes of this document, the term NDT will be used and will be considered equivalent to NDI and NDE.In Europe, the term "approval" is used to denote a written statement by an employer that an individual has met specific requirements and has operating approval. The term "certification" as defined in 3.2 is used throughout this document as a substitute for the term "approval". Except when otherwise specified in the written practice, certification in accordance with this document includes operating approval.1.2 ApplicabilityThis document applies to personnel using NDT methods to test and/or accept materials, products, components, assemblies or sub-assemblies. This document also applies to personnel: directly responsible for the technical adequacy of the NDT methods used, who approve NDT procedures and/or work instructions, who audit NDT facilities, or who provide technical NDT support or training.This document does not apply to individuals who only have administrative or supervisory authority over NDT personnel or to research personnel developing NDT technology for subsequent implementation and approval by a certified Level 3. Personnel performing specialized inspections using certain direct readout instruments as determined by a Level 3 certified in the method, do not require qualification or certification to this document.1.2.1 ImplementationThis document addresses the use of a National Aerospace NDT Board (NANDTB). NANDTBs are only used as specified per Annex C and it is not mandatory to have such a board for compliance with this document. Personnel certified to previous revisions of NAS 410 or EN 4179 need not recertify to the requirements of this document until their current certification expires.1.3 Methods1.3.1 Common methodsThis document contains detailed requirements for the following common NDT methods:Eddy Current Testing (ET)Liquid Penetrant Testing (PT)Magnetic Particle Testing (MT)Radiographic Testing (RT)Thermographic Testing (IRT)Ultrasonic Testing (UT)1.3.2 Other methodsWhen invoked by engineering, quality, cognizant engineering organization or prime contractor requirements, this document applies to other current and emerging NDT methods used to determine the acceptability or suitability for intended service of a material, part, component, sub-assembly or assembly. Such methods can include, but are not limited to, acoustic emission, neutron radiography, leak testing, holography, and shearography. The requirements for personnel training, experience, and examination for these other methods are established in accordance with 6.4 and are documented by the employer.

Rekisteröidyttyäsi Lausuntopyyntöpalvelun käyttäjäksi voit lukea standardiehdotuksia ja kommentoida niiden sisältöä.

Kun haluat kommentoida lukemaasi tekstiä, valitse Lue ehdotus ja anna muutosehdotuksesi kohdassa Jätä kommentti.

Voit myös kertoa mielipiteesi standardiehdotuksesta kokonaisuutena. Ota kantaa siihen, hyväksytkö standardiehdotuksen vahvistamisen standardiksi.