Ehdotuksen tiedot

Tunnus:ISO/DIS 15638-23
Julkaisija:ISO
Komitea:ISO/TC 204
Komitean nimi:Intelligent transport systems
Lausuntokierros alkanut:2022-04-24
Lausuntopyynnön määräaika:2022-06-20
Toimialayhteisö:Yhteinen Toimialaliitto
Vastuuhenkilö:kimmo.konkarikoski(at)ytl.fi
Ehdotuksen soveltamisala:This part of ISO 15638 addresses the provision of tyre pressure monitoring and specifies the form and content of the transmission of such data required to support such systems, and access methods to that data. The scope of this part of ISO 15638 is to provide specifications for common communications and data exchange aspects of the application service “tyre pressure monitoring” (TPM) that a jurisdiction regulator, or operator, may elect to require or support as an option, including: The present version of this International Standard provides specifications for the following application profiles: Application Profile A1 : The cyclical initiation of TPM message by on-board equipment (TPM-C) Application Profile A2 : The exceptional initiation of TPM message by on-board equipment (TPM-E) Application Profile A3: The provision of TPM data as the result of an offboard request (TPM-R) Application Profile A4: The provision of TPM data as the result of an offboard reading of tyre pressures of vehicles which may be unequipped (TPM-O) The present version of this International Standard provides specifications for the following communication profiles: Communication Profile C1: Remote inspection addressed via an ITS-station instigating a download of data to an application service provider via a wireless communications interface (as defined in ISO 15638-2). Communication Profile C2: Remote inspection addressed via a packet switched cellular network (3G LTE, 4G LTE, 5G SRE) instigating a download of data to an application service provider via a wireless communications interface. Communication Profile C3: Roadside inspection using an (EN, ARIB, TTAK compliant) short range wireless communication interrogator to an application service provider via a wireless communications interface (as defined in ISO 15638-2). Profile C3a: via a hand aimed or temporary roadside mounted and aimed interrogator Profile C3b: via a vehicle mounted and directed interrogator Profile C3cc: via a permanent or semi-permanent roadside or overhead gantry Communication Profile C4: Roadside inspection using an (EN, ARIB, TTAK compliant) short range wireless communication interrogator instigating a physical roadside inspection (master-:-slave) Profile C3a: via a hand aimed or temporary roadside mounted and aimed interrogator Profile C3b: via a vehicle mounted and directed interrogator Profile C3cc: via a permanent or semi-permanent roadside or overhead gantry Communication Profile C5: Roadside inspection using in-road equipment Subsequent versions of this International Standard may support additional communication profiles. Systems claiming compliance with this part of ISO 15638 (ISO 15638-23) may support one or multiple application profiles but shall clearly declare which application profiles of this International Standard that they support.(A1 (TPM-C), A2(TPM- E, A3(TPM-R), A4(TPM-O) Systems claiming compliance with this part of ISO 15638 (ISO 15638-23) may support one or multiple communication profiles but shall clearly declare which communication profiles of this International Standard that they support. (C1, C2, C3 a-c).

Rekisteröidyttyäsi Lausuntopyyntöpalvelun käyttäjäksi voit lukea standardiehdotuksia ja kommentoida niiden sisältöä.

Kun haluat kommentoida lukemaasi tekstiä, valitse Lue ehdotus ja anna muutosehdotuksesi kohdassa Jätä kommentti.

Voit myös kertoa mielipiteesi standardiehdotuksesta kokonaisuutena. Ota kantaa siihen, hyväksytkö standardiehdotuksen vahvistamisen standardiksi.