Ehdotuksen tiedot

Tunnus:prEN ISO 20182
Julkaisija:CEN
Komitea:CEN/TC 187
Komitean nimi:Refractory products and materials
Lausuntokierros alkanut:2024-01-07
Lausuntopyynnön määräaika:2024-02-22
Vastuuhenkilö:kari.silvennoinen(at)rt.fi
Ehdotuksen soveltamisala:
his International Standard describes the procedure for the preparation of test panels from refractory materials by gunning through pneumatic nozzle mixing type guns at ambient temperatures. The test pieces are for the determination of properties on as-gunned products prepared under either “standard conditions” (as required for quality assurance or product development) or “site conditions”. In the case of “site conditions”, the purpose of the testing is to establish the properties pertaining to a given installation or a given set of installation conditions. In this case, the panel is obtained during the on-site installation. Such parameters as ambient temperature, gunning elevation, air pressure and curing conditions (temperature, orientation of the panel) applying during the preparation of the panel are as near as possible to the same parameters pertaining to the site installation. This International Standard does not apply to plastic gunning mixes and might not apply to those mixes that contain aggregates that are susceptible to hydration. It also does not apply to shotcrete type mixes. (These are dealt with in ISO 18886, “Refractory test-piece preparation – Gunning refractory panels by wet gunning techniques.”).

Rekisteröidyttyäsi Lausuntopyyntöpalvelun käyttäjäksi voit lukea standardiehdotuksia ja kommentoida niiden sisältöä.

Kun haluat kommentoida lukemaasi tekstiä, valitse Lue ehdotus ja anna muutosehdotuksesi kohdassa Jätä kommentti.

Voit myös kertoa mielipiteesi standardiehdotuksesta kokonaisuutena. Ota kantaa siihen, hyväksytkö standardiehdotuksen vahvistamisen standardiksi.