Ehdotuksen tiedot

This document specifies the common safety requirements for drilling and foundation equipment. This document deals with the significant hazards (see Annex F) common to drilling and foundation equipment (see ISO 11886:____)1 1 Under preparation (stage DIS), , when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (transport, assembly, dismantling, equipment in service and out of service, maintenance, moving on site, storage, disabling and scrapping). This document gives common safety requirements for drilling and foundation equipment and is intended to be used in conjunction with relevant parts of this series (Part 2 thru Part 6). These machine specific parts do not repeat the requirements from part 1 but supplement or modify the requirements for the type of drilling and foundation equipment in question. For multipurpose machinery, the parts of the standard that cover the specific functions and applications are used, e.g. a drilling machine also used as a piling machine will use the relevant requirements of ISO 20770-1 to -6. The following machines are excluded from the scope of this standard: Where a drilling and foundation machine of fixed configuration that is not intended to be separated is assembled using a carrier machine based on earth-moving equipment, agricultural equipment, or crane, then the completed assembly is covered by this document. Drilling and foundation machinery within the scope of ISO 20770 parts 1 to 5 may include interchangeable auxiliary equipment within the scope of ISO 20770-6, either as an integral part of its construction or as interchangeably fitted equipment. Hazards due to: are not covered by this document. This document is not applicable to drilling and foundation equipment manufactured before the date of its publication.