Ehdotuksen tiedot

1.1 This document specifies the safety requirements for lifting tables which fulfil the following characteristics: — serving no more than 2 fixed landings but able to pass a fixed landing and, — having a vertical travel speed of no more than 0,15 m/s, unless the lifting table is safe by position and, — raising or lowering goods (with or without operator(s) and/or authorized person(s)) with a fixed, movable or mobile lifting table or, — raising or lowering operator(s) and/or authorized person(s) with or without goods, to positions where they can carry out work from a fixed lifting table that is guided throughout its vertical travel only. 1.2 This document specifies the appropriate technical measures for eliminating and reducing the risks arising from the significant hazards listed in Annex B. 1.3 This document does not apply to the following equipment: — lifting tables with a vertical travel speed exceeding 0,15 m/s, unless the lifting table is safe by position; — lifting tables, serving more than 2 fixed landings of a construction, for lifting goods, with a vertical travel speed not exceeding 0,15 m/s (EN 1570 2:2016); — lifting tables, serving more than 2 fixed landings of a construction, for lifting operators, with a vertical travel speed not exceeding 0,15 m/s; — lifting tables carrying operators and installed in full enclosures with a vertical travel speed not exceeding 0,15 m/s; — lifting tables used on ships; — lifting tables designed for artists and stage set features during artistic performances (EN 17206:2020); — power operated lifting platforms for persons with impaired mobility (EN 81 41:2010); — mobile lifting tables for airport ground support equipment (EN 1915 2:2001+A1:2009 and EN 12312 1:2013); — mobile elevating work platforms (EN 280 1:2022); — vehicle servicing lifts (EN 1493:2022); — mobile lifting tables used for firefighting (EN 1777:2010); — mobile lifting tables with a horizontal travelling speed of more than 1,6 m/s; — rail dependent storage and retrieval equipment (EN 528:2021); — scissor lift pallet trucks (EN ISO 3691 5:2015); — lifting tables suspended from a ceiling. 1.4 This document does not consider the requirements for: — operation in severe conditions (e.g. extreme climates, freezer applications, strong magnetic fields); — operation subject to special rules (e.g. potentially explosive atmospheres, mines); — handling of loads, the nature of which could lead to dangerous situations (e.g. molten metal, acids, radiating materials, particularly brittle loads, loose loads (gravel, tubes)); — hazards occurring during construction, transportation, and disposal; — equipment installed on the load platform or the replacing or maintaining of it; — integration into broader systems or other machines, etc.; — cable-less controls, i.e. wireless; — lifting tables where the hydraulic pressure is derived directly from gas pressure; — lifting tables powered by internal combustion engines. This document is not applicable to lifting tables manufactured before the date of its publication.