Haku - 100 tulosta termille '山西省副省长 王'

 

This document specifies the safety requirements applicable to all installations. In particular, it will include new requirements for better taking into account the effects of wind. It will also include new requirements relating to the prevention of accidents and the protection of worker

 

This document specifies a method for the determination of 5 oestrogens, in whole water samples listed in Table 1. The method uses solid-phase extraction (SPE-disks and/or cartridges) followed by liquid or gas chromatography-mass spectrometry (tandem mass spectrometry and/or High resolution mass spectrometry). It is applicable to the analysis of selected estrogens in surface water containing suspended particulate matter (SPM) up to 50 mg/l , DOC content up to 7 mg/l (whole water samples), drinking water and groundwater.

 

ISO 10256-5:2017 specifies performance requirements and test methods for neck laceration protectors for use in ice hockey and is intended to be used in conjunction with ISO 10256-1:2024. The 2017 version needs revisions to align with the other parts of the 10256 series, currently awaiting publication.

 

This document specifies performance requirements and test methods for neck laceration protectors for use in ice hockey. This document is applicable to neck laceration protectors worn by: This document does not address protection of the neck from the impact of pucks, sticks or other objects.

 

This document specifies a method for determining the long-term pressure endurance of glass-reinforced thermosetting plastics (GRP) pipes, based on the residual failure strength of test pieces after ageing for a specified time at specified internal pressure and temperature. The internal environment is specified in the referring standard. The external environment can be air or water.

 

This document specifies a method for the determination of the strain hardening modulus, which is used as a measure for the resistance to slow crack growth of polyethylene. This document specifies how to obtain a strain hardening modulus measurement from “true stress vs. draw ratio” curves on compression moulded samples. Details of the necessary equipment, precision and sample preparation for the generation of data are given. This document provides a method that is valid for all types of polyethylene, independent from the manufacturing technology, comonomer or catalyst type used for pipes and fittings applications.

 

 

 

 

 

This document specifies requirements and guidelines for organizations to consider biodiversity in their strategies and operations, thereby adopting a biodiversity approach. It is applicable to any type of organization, irrespective of its size or nature (e.g. large groups, public institutions, local authorities, mid-cap companies, associations, micro-structures, single-member companies), sector, level of development and the extent to which it includes biodiversity protection in its activities.

 

 

Pyydämme kantaasi standardiehdotuksen hyväksyntään. Vastaa kohdassa ’Ota kantaa’ tulisiko tämä standardiehdotus hyväksyä maailmanlaajuiseksi ISO-standardiksi.

 

Lisäksi keräämme tällä lausuntokierroksella kannanottoja standardiehdotuksen vahvistamiseen kansalliseksi SFS-ISO-standardiksi. Vahvistamispäätökseen vaikuttaa suomalaisten toimijoiden näkemys ja kiinnostus vahvistettavaan standardiin. Jätä kansallista vahvistamista koskeva kommenttisi kohdassa ’Lue ehdotus’.

 

This document specifies a procedure to determine tightening procedures for pretensioned bolted connections to be used in structural steelwork. The methods to establish bolt tightening procedures given in this document are applicable to pretensioned bolted connections for which no approved tightening parameters exist in national or international standards. Such use cases apply, for example, if bolting assemblies have to be tightened by turning the head instead of the nut, assuming any of the conditions, given in a harmonized standard for pretensioning of bolting assemblies, are deviating or when stainless steel bolting assemblies are to be pretensioned. In these cases, tightening parameters as well as tightening procedures can be determined with the use of the Bolt Tightening Qualification Procedure (BTQP) given in this document.

 

This document provides normative tables of machine performance levels required (MPLr) by common function and type for earth-moving machinery (EMM) as defined in ISO 6165. These MPLr can then be mapped or applied to safety control systems (SCS) used to control or that affect the functions defined in the table. The MPLr in this document are determined through the machine control system safety analysis (MCSSA) process outlined in ISO 19014-1. A brief explanation of how the levels were derived and the associated assumptions are contained herein. This document is not applicable to EMM manufactured before the date of its publication.

 

This document specifies the minimum requirements for environmental testing of electronic and electrical components identified as safety-related parts of the control system (SRP/CS) used on earth-moving machinery (EMM) as defined in ISO 6165:2022. This document does not address explosion proofing.

 

This document specifies the minimum requirements for environmental testing of electronic and electrical components identified as safety-related parts of the control system (SRP/CS) used on earth-moving machinery (EMM) as defined in ISO 6165 and their attachments.

 

This document provides a methodology for the determination of performance levels required for earth moving machinery (EMM) as defined in ISO 6165. A Machine Control System Safety Analysis (MCSSA) determines the amount of risk reduction of hazards associated with control systems, required for Safety Control Systems (SCS). This reduction is quantified by the Machine Performance Level (MPL), the hazards are identified using the risk assessment principles as defined in ISO 12100 or by other means. NOTE 1 Step 2 as shown in Annex A demonstrates the relationship between ISO 12100 and ISO 19014 as a complementary protective measure. NOTE 2 ISO 19014 can also be used to assess the functional safety requirements of other off-road mobile machinery. For those controls determined to be safety-related, the characteristics for architecture, hardware, software environmental requirements and performance are covered by other parts in ISO 19014. ISO 19014 covers the hazards caused by the failure of a safety control system and excludes hazards arising from the equipment itself (for example, electric shock, fire, etc.). Other controls that are not safety control systems (SCS), that do not mitigate a hazard or perform a control function and where the operator would be aware of a failure, are excluded from this standard (e.g. windscreen wipers, head lights, cab light, etc.). NOTE 3 A list of safety control systems is included in Annex D. NOTE 4 Audible warnings are excluded from the requirements of diagnostic coverage.

 

This document specifies a methodology for the determination of performance levels required for earth-moving machinery (EMM) as defined in ISO 6165. A machine control system safety analysis (MCSSA) determines the amount of risk reduction of hazards associated with control systems that is required for safety control systems (SCS). This reduction is quantified by the machine performance level (MPL) and the hazards are identified using the risk assessment principles as defined in ISO 12100 or by other means. For those controls determined to be safety-related, the characteristics for architecture, hardware, software environmental requirements and performance are covered by other parts in ISO 19014. The ISO 19014 series covers the significant hazards caused by the failure of a safety control system and excludes hazards arising from the equipment itself (for example, electric shock, fire,). Other controls that are not safety control systems (SCS), that do not mitigate a hazard or perform a control function, and where the operator would be aware of a failure, are excluded from this standard (e.g. windscreen wipers, head lights, cab light,). This document is not applicable to EMM manufactured before the date of its publication

 

This document specifies general principles for software development and signal transmission requirements of safety-related parts of machine-control systems (MCS) in earth-moving machinery (EMM) and its equipment, as defined in ISO 6165. In addition, this document addresses the significant hazards as defined in ISO 12100 related to the software embedded within the machine control system. The significant hazards being addressed are the incorrect machine control system output responses from machine control system inputs. Cyber security is out of the scope of this document. NOTE For guidance on cybersecurity, see an appropriate security standard. This document is not applicable to EMM manufactured before the date of its publication.

 

This document specifies general principles for the development and evaluation of the machine performance level achieved (MPLa) of safety-control systems (SCS) using components powered by all energy sources (e.g. electronic, electrical, hydraulic, mechanical) used in earth-moving machinery and its equipment, as defined in ISO 6165. The principles of this document apply to machine control systems (MCS) that control machine motion or mitigate a hazard; such systems are assessed for machine performance level required (MPLr) per ISO 19014-1 or ISO/TS 19014-5. Excluded from the scope of this document are the following systems: —    awareness systems that do not impact machine motion (e.g. cameras and radar detectors); —    fire suppression systems, unless the activation of the system interferes with, or activates, another SCS. Other systems or components whereby the operator would be aware of failure (e.g. windscreen wipers, head lights, etc.), or are primarily used to protect property, are excluded from this document. Audible warnings are excluded from the requirements of diagnostic coverage. In addition, this document addresses the significant hazards as defined in ISO 12100 mitigated by the hardware components within the SCS. This document is not applicable to EMM manufactured before the date of its publication.

 

This document specifies general principles for software development and signal transmission requirements of safety-related parts of machine-control systems (MCS) in earth-moving machinery (EMM) and its equipment, as defined in ISO 6165:2022. In addition, this document addresses the significant hazards as defined in ISO 12100:2010 related to the software embedded within the machine control system. The significant hazards being addressed include incorrect machine control system output responses from machine control system inputs. Cyber security is out of the scope of this document. This document is not applicable to EMM manufactured before the date of its publication.